The API® REEF MASTER TEST KIT test 4 key parameters – calcium, carbonate hardness, phosphate, and nitrate – to keep reef inhabitants healthy. Testing is fast, easy, and accurate, yielding precise results, and comes with 4 glass test tubes with snap-tight caps and a convenient holding tub for easy, reusable storage. This kit also includes a complete, step-by-step instructional booklet with a color chart that provides information on how to correct unsafe water conditions.

We recommend that you take a few minutes each week to monitor your aquarium conditions and create a better underwater world for your fish. Testing your aquarium water has never been so easy or accurate!

Bulkhead Fittings 1.5 Inch Slip/slip

Rock Lock is an incredible reef cement that sets in just about two minutes. Perfect for attaching corals or creating rock sculpture, and can be used in or out of water.

• Create dramatic rock sculptures instantly
• Easily attach corals to existing structures
• Can be used underwater or out of water
• Sets in 2 minutes
• Safe for use in marine and reef aquariums

Easily cement rocks to created dramatic structures or attach corals to your existing reef scape. CaribSea Rock Lock is a 2 minute fast-setting reef cement that can be used either in or out of water to create bonds in mere minutes. Safe for marine tanks, fish, corals, and other invertebrates. 

Available Size: 500ml

A highly accurate, easy to use, wide range specific gravity meter for marine aquarium use. Designed to eliminate inaccuracy issues common with competitive quick-dip hydrometers while helping you take a water sample from a greater depth that is free of the negative impact of surface influences.

Durable Construction For Extended Life

• "Dry Hands" design avoids contamination of aquarium or water
• Takes a more "true" water saple at a 6 inch depth, avoiding inaccurate surface sampling
• Accurate to ±0.001 specific gravity and salinity (PPT) measurements
• Auto temperature-correcting design to give a temperature-corrected reading in warm water aquariums - 68°F to 85°F (20°C to 30°C)
• Readings can be taken in or outside the aquarium
• Self-leveling, hanging device collects perfect samples
• Scientifically verified design offers the ultimate in accuracy

Note: Before using for the first time, to season the measurement needle, fill the hydrometer with saltwater from your aquarium and allow it to sit full of this water on a level surface for 24 hours. This rehydrates the calibration disc to its original specs and calibration standard and will provide the most accurate readings going forward.

1. Submerge hydrometer approximately 6 inches to water level line.
2. When water reaches the fill line level (top of dam) remove hydrometer and place on a level surface to take the most accurate reading.
3. Avoid air bubble adherence to the pointer as this will result in inaccurate, higher than normal readings. Should air bubbles collect on pointer, gently tap hydrometer to dislodge them before taking your reading.
4. Read specific gravity on inside scale and salinity in parts per thousand (PPT) on the outside scale. A recommended specific gravity of 1.020 to 1.023 is desirable for most marine aquariums.
5. Rinse with fresh water after each use to maintain optimum accuracy.

Salt deposits may accumulate on pointer and will result in inaccurate readings. If salt crystallizes inside your unit, soak it in lukewarm water or vinegar for 30 minutes, rinse with fresh water and allow to air dry. Rinse again with warm fresh water before next use.

Each AccuProbe^® Hydrometer is assigned an individual certified calibration number which is your assurance the unit was finely tuned prior to shipping from our production facility to provide the most accurate reading possible.

Reef Booster helps aid and speed the development of invertebrates, corals, clams, and microfauna. By feeding and maintaining anaerobic bacteria, the reduction of nitrate and phosphate occurs. Reef Booster is a complete nutritional supplement that has been developed in partnership with aquaculture experts based on highly effective additives that were successfully used with crustation, mollusk, and bivalve larvae.

Benefits

• Very high concentrations of W3 Fatty acids
• Complete nutritional supplement
• A few drops can be added to fish food to entice appetite 
• Helps stabilize coral colors

How to use Reef Booster

• It is suggested to dose every 15 days to keep a balance of nutrients available

Available in a 6 pack

How often do I add Reef Booster?

Meridian is an all natural oolitic (spherical or egg shaped) aragonite substrate for all reef and marine aquaria. Meridian is the premium aragonite substrate for the reef aquaria. It's grain size (a fairly uniform 0.25 - 0.50 mm) is ideally suited to reef inhabitants and it's chemical composition will assist in stabilizing calcium and alkalinity while preventing large pH declines. Unlike competing "wet" products marketed under the guise of being "live", Meridian is sold dry, thus you pay only for gravel and not for unneeded water. These products imply that they contain living, microscopic animals when in fact they only contain common bacteria. Dry or wet, there are bacteria on every substrate available.

• Natural oolitic aragonite for all types of marine, reef, and tropical aquaria
• Assists in stabilizing calcium and alkalinity
• Helps prevent large pH declines

Meridian™ Mineral Composition

Units=ppm, source: Plasma Emission Spectrometer, EPA Method 3050, Univ. of Georgia Chemical Analysis Lab

Available Size: 3.5 kg

Copper kits are usually of two types: compleximetric or titration based. Some kits measure only ionic copper and others measure both ionic and chelated copper. This kit uses a highly sensitive catalytic compleximetric based procedure to measure all types of copper to less than 0.01 mg/L in marine or freshwater. MultiTest™ Copper performs over 75 tests and contains a reference sample for validation.

• Measures all types of copper to less than 0.01 mg/L
• Multi-cavity plate for simultaneous testing of up to 6 tests at the same time
• Includes reference for test validation
• Marine or Freshwater

Natural seawater (NSW) concentration of iodide is 0.06 mg/L. Ideally, it is advisable to maintain iodide close to NSW concentration. Concentrations above NSW may not be harmful, and, within limits, may even be beneficial, but maintenance at elevated concentrations should be considered experimental.

The innovative MultiTest™ Iodine/Iodide kit offers a quantitative test for this important element of soft and hard coral growth. It measures iodine or iodide to less than 0.005 mg/L. The color scale peaks at 0.10 mg/L. It performs over 75 tests and contains a reference sample for validation.

• Catalysis based, sensitive to less than 0.0025 mg/L
• Multi-cavity plate for simultaneous testing of up to 6 tests at the same time
• Includes reference for test validation
• Marine or Freshwater